Leading Misting System and Fogging system manufacturers and suppliers in Indore for Homes, Industrial, and Commercial applications. Misting systems create an excellent mist or fog effect. It is a package of pumps and a series of misting nozzles connected to tubing, and the system is pressurized to provide a fine mist or fog with tiny water droplet sizes anywhere between 5 to 50 microns. We offer a fine quality range of High-Pressure Misting Systems, and cooling and misting systems, which have various features including high performance, strong edges, easy to use and low maintenance. These products also have an option of customization as per our clients.

The mist system works on evaporation cooling and works perfectly with dry weather conditions. However, it works averagely in humid weather and can reduce dust, odors, static electricity, and flying insects like Mosquitoes. It even helps regulate and maintain humidity for plants, greenhouses, homes, atrium, courtyard, Patio, hotel restaurants, etc.

Three types of Misting / fogging systems are available. 

Low Pressure

Mid Pressure 

High pressure 

When attached to high-pressure pumps, water is forced through nozzles, forming droplets that evaporate into mist when they reach the outdoor air. This can reduce the temperatures by up to 12°C degrees Celsius. If the misting system is in a confined indoor area, it will provide a cool-mist and increase humidity. 

The necessary knowledge is required before selecting the right misting system for the proper purpose. We will guide you through the options available. 

Let’s discuss the classification of misting system available.

 A Low-Pressure misting system is almost like a sprinkler system where the water droplet size is above 50 microns. It is a straightforward and least expensive system of all as the working pressure will be in the range of 10 bar. Low-Pressure spray cools a small area, but water particles wet the area hugely.

One of the most popular models of low-pressure systems is TrueMIST Eco. These systems are affordable and easy to attach. Some of these systems use a pump, which puts those in the range of Medium Pressure systems.

 A Medium Pressure misting system uses a motorized pump to raise the pressure to 20 to 35 bar. The pump and motor, tubes, fittings, and nozzles are rated to work within this range. The spray is fine enough to cool you in hot, dry weather, is less likely to get you wet, and can provide more cooling than a Low-pressure system.

 A High-Pressure misting system will give the maximum cooling of any misting system available as it works in higher pressure above 35 bar even in areas with high humidity without getting anything wet. Misting system over 35 bar is known as a high-pressure misting system, and maximum efficiency can be achieved around 55 – 80 bar (800 – 1200 psi). As with all mist systems, all components must be rated to work within the same water pressure range.

Medium and High-Pressure systems use pumps to increase the water pressure from any water source, a gravity-fed source that already has some water pressure, or a ground source such as a pond or tank with still water that has no force.